Welcome
  • Spot Detector (SD)

    The SD spot detector is designed to primarily function with RLE environmental monitoring controllers, specifically the FMS and RA1x2. The SD comes with a two-wire open lead that allows it to be wired directly to the controller’s terminal block.

    Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans.

    The SD functions like a switch – the circuit remains open until a leak is detected. The sense probes detect a leak, which causes the circuit to close, which then triggers an alarm.

  • Spot Detector (SD-RO1)

    The SD-RO1 is a single zone spot detector with one relay output. It can be used in conjunction with any product that accepts a digital dry contact input.

    Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans.

  • Spot Detector (SD-Z1)

    The SD-Z1 is a single zone spot detector designed to work with zone leak detection systems including the F200, LD310, LD1000, and LDRA6. RLE recommends using only one SD-Z1 per zone.

    Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans.

  • Spot Detectors

    Designed to work with all of RLE’s leak detection controllers, the SD-Z spot detector can be connected to other SD-Z units or to sensing or non-sensing cable.

    The SD-Z can be used with either zone or distance-read leak detection controllers. When used with a distance-read system, the SD-Z simulates 50 feet of cable – 25ft. (7.62m) from the male connector to the SD-Z, and 25ft. (7.62m) from the SD-Z to the female connector.

    Spot detectors are ideal for small spaces, and are the most economical way to detect fluids in confined areas, such as condensation drip pans.

    Because a SD-Z cannot connect directly to a controller, leader cable and an EOL terminator are required for installation. RLE packages these components as an LC kit. If you’re adding the SD-Z to an existing RLE leak detection system, additional leader cable and EOL may be unnecessary. Please check your supplies before you attempt to install the SD-Z.

  • Zone Controllers (F200)

    This innovative, affordable product couples leak detection and facility monitoring in one plug-and-play package.

    Designed to be simple, effective, and efficient, RLE Technologies’ F200 monitors environmental parameters and protects facilities from disastrous consequences.

    – 4 Sensor Inputs – You choose whether you’d like to deploy temperature sensors, temperature/humidity sensors, or a combination of the two.
    – 8 Digital Inputs – Unlimited monitoring possibilities. Monitor something as simple as whether a door is opened or closed, or monitor more complex parameters including motion sensors, fire alarms, gas detectors, airflow sensors, and summary alarms from critical equipment including UPSs and generators.
    – 1 Relay Output – Use the F200’s relay output to control an external device in the event of an alarm condition.
    – 1 Zone Leak Detection – The F200 can supervise an SD‑Z1 spot detector or up to 200 feet of our patented leak detection sensing cable and inline SD‑Z spot detectors.
    Logging – The dashboard displays the 50 most recent alarm and return to normal events, including date and time stamps for each.
    – Trending – A line graph displays up to 86,400 points in time – each point records the temperature and humidity (where applicable) readings of all sensors plugged into the F200. Trending is customizable – you choose how frequently the points are sampled. View the graph through your web browser and use the sliders at the bottom of the graph to get an up-close view of your data points.
    – Plug-and-Play – Once all your monitoring connections are snapped into place, the F200 does the rest. Information is displayed on the F200’s sleek, integrated web interface. Intuitive options and menuing keep configuration quick and easy, and the interface can be accessed from any computer or mobile device.

  • Zone Controllers (LD1000)

    The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable. It is compatible with all SeaHawk sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors.

    As a stand-alone leak detection controller, the LD1000 features an audible alarm and three LED indicators. The LD1000 can also integrate into existing monitoring systems. It is ideal for small areas, facilities where the sensing cable or spot detector is exposed or leaks can be easily located, and areas where the audible/visible alarm can be easily noticed.

  • Zone Controllers (LD310)

    The SeaHawk LD310 single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable. It is compatible with all of RLE’s leak detection sensing cables, as well as SD-Z and SD-Z1 spot detectors.

    When your system is in alarm, the LD310 will notify you via:

    Audible alarm
    Visible LED
    Leak and fault relay outputs
    Where should you use the LD310?

    Ideal for smaller areas and facilities, the LD310 can act as a stand-alone controller or integrate into existing monitoring systems. The LD310 is most commonly installed in facilities with pumps, chillers, boilers, water control valves, and around air conditioner condensation pans.

    How much cable do I need?

    Ready to purchase a SeaHawk system? Download and use our SeaHawk Sensing Cable Length Calculator to make sure you order the right amount of cable.

    Make sure you have the right power supply!

    Note: An isolated 5VDC power supply is required to power the LD310. A power supply is not included with the LD310. Purchase RLE power supply WA-DC-5-ST.

  • Zone Controllers (Wi-LD)