Navigation
Account
Sign in / Register
+ (246) 271-2059 | [email protected]

Spot Detector (SD)

Key Features

No exposed metal sensing posts – nothing to rust or corrode

Potted electronics

Functions when submerged in water

Adjustable probes are easily adjusted to desired height

Can be screwed or ram set to floor or baseboard

Small footprint/enclosure

Simple installation

Ideal for tight areas

Power: The SD is usually powered by the RLE FMS or RA1x2. In the event that it is not used in conjunction with one of these products, it does require an isolated power supply.

24VDC (±10%) Isolated @ 0.1A max.; requires RLE power supply PSWA-DC-24-ST (not included)

If a DC power supply is used the SD will be a latching device – once an alarm is detected, the spot detector will remain in an alarm state until power is cycled to the SD.

4VAC (±10%) Isolated @ 0.1A max.; requires RLE power supply WA-DAC-24-ST (not included)

Solid State Output: 12-36VAC @ 0.01A min., 0.1A max.; 18-36VDC @ 0.01A min., 0.1A max.

Leader Cable (Non-sensing)

Length: 14 feet (4.27m)

Connector: N/A

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 1.55″W x 2.0″H x 1.0″D (39.4mmW x 50.8mmH x 25.4mmD)

Weight: 4 oz. (105g)

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant.

Compare