Zone Controllers (Wi-LD)

Key Features

Accommodates:

up to 300 feet (91 meters) of conductive fluid sensing cable and/or spot detectors, or

up to 210 feet (64 meters) of chemical sensing cable

Visible alarm indicator

Two Form C output relays for leak and fault alarms

Audible and visible alarm notification

Adjustable leak alarm sensitivity thresholds

Configurable for supervised or non-supervised operation

Distinguishes normal conditions from alarm conditions

Quickly returns to normal

Included Equipment: LD310 controller, leader cable, end-of-line (EOL) terminator

Additional Requirements: Power supply WA-DC-5-ST, sensing cable and spot detector (as needed for application)

Power: Requires an isolated power supply.

5VDC Isolated (±10%) @ 100mA max; requires RLE power supply WA-DC-5-ST (not included)

Inputs

Leak Detection Cable: Compatible with all SeaHawk sensing cables as well as SD-Z and SD-Z1 spot detectors (not included)

One Cable Input: Requires 15ft (4.6m) leader cable and EOL terminator (included)

Maximum Sensing Cable Length: 300ft (91m) of conductive fluid sensing cable, or 210ft (64m) of chemical sensing cable

Detection Response Time: When used with conductive fluid or chemical sensing cables, less than 20sec; 10sec typical.

Outputs: 2 Form C Alarm Relays (leak and fault); 1A @ 24VDC, 0.5A resistive @ 120VAC; configurable as supervised or non-supervised

Alarm Notification

Audible Alarm: 85dB @ 10cm (min)

Visual Alarm: Bi-color LED

Front Panel Interface

Audible Alarm: Indicates cable break or leak detected

LED Indicator:

Normal Operation: Green

Cable Fault: Flashing orange

Leak Detected: Flashing red

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 2.7″W x 4.4″H x 1.38″D (69mmW x 112mmH x 35mmD)

Weight: 3.0 oz. (85.0g)

Mounting: Surface mount

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010-1; RoHS compliant

Key Features

Monitors:

up to 1,000 feet (305 meters) of conductive fluid sensing cable and/or spot detectors, or

up to 700 feet (213 meters) of chemical sensing cable

Three LED indicators: Power, Leak, Fault

Selectable audible alarm annunciation

Configurable for supervised or non-supervised operation

Adjustable sensitivity settings

Wall mount enclosure

Two Form C output relays for leak and fault alarms

Included Equipment: LD1000 controller, leader cable, end-of-line (EOL) terminator

Additional Requirements: RLE power supply, sensing cable and spot detector (as needed for application)

Power: Requires an isolated power supply for DC operation.

24VDC (±10%) Isolated @ 300mA max.; requires RLE power supply PSWA-DC-24-ST (not included)

24VAC (±10%) @ 300mA max.; requires RLE power supply WA-AC-24-ST (not included)

Inputs

Leak Detection Cable: Compatible with SeaHawk sensing cables (not included)

Cable Input: Requires 15ft (4.6m) leader cable and EOL terminator (included)

Maximum Sensing Cable Length: 1,000 feet (305m) of conductive fluid sensing cable, or 700 feet (213m) of chemical sensing cable or hydrocarbon sensing cable

Detection Response Time: Configurable for 10sec or 2min, ±10%, when used with conductive fluid or chemical sensing cables.

Outputs: 1 Form C Leak Relay, 1 Form C Cable Fault Relay, configurable to 2 Summary Alarm Relays; 1A @ 24VDC, 0.5A resistive @ 120VAC; configurable for supervised or non-supervised, latched or non-latched

Alarm Notification: Audible Alarm 85DBA @ 2ft (0.6m); Selectable

Front Panel Interface

LED Indicators: Power: 1 green (on/off); Cable Fault: 1 amber; Leak Detected: 1 red

Push Buttons: 1: Quiet,Reset, Test

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 4.125″W x 5.5″H x 2.25″D (105mmW x 140mmH x 58mmD)

Weight: 27.0 oz. (765g)

Mounting: Wall mount

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant

Key Features

No exposed metal sensing posts – nothing to rust or corrode

Potted electronics

Functions when submerged in water

Adjustable probes are easily adjusted to desired height

Can be screwed or ram set to floor or baseboard

Small footprint/enclosure

Simple installation

Ideal for tight areas

Power: Requires an isolated power supply.

24VDC (±10%) Isolated @ 0.1A max.; requires RLE power supply PSWA-DC-24-ST (not included)

If a DC power supply is used the SD-RO1 will be a latching device – once an alarm is detected, the spot detector will remain in an alarm state until power is cycled to the SD-RO1.

24VAC (±10%) Isolated @ 0.1A max.; requires RLE power supply WA-AC-24-ST (not included)

Relay Output: Dry Contact, Form C; 1A @ 24VDC, 0.5A resistive @ 120VAC

Leader Cable (Non-sensing)

Length: 14 feet (4.27m)

Connector: N/A

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 1.55″W x 2.0″H x 1.0″D (39.4mmW x 50.8mmH x 25.4mmD)

Weight: 7 oz. (192g)

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant

Key Features

No exposed metal sensing posts – nothing to rust or corrode

Potted electronics

Functions when submerged in water

Adjustable probes are easily adjusted to desired height

Can be screwed or ram set to floor or baseboard

Small footprint/enclosure

Simple installation

Ideal for tight areas

Power: The SD is usually powered by the RLE FMS or RA1x2. In the event that it is not used in conjunction with one of these products, it does require an isolated power supply.

24VDC (±10%) Isolated @ 0.1A max.; requires RLE power supply PSWA-DC-24-ST (not included)

If a DC power supply is used the SD will be a latching device – once an alarm is detected, the spot detector will remain in an alarm state until power is cycled to the SD.

4VAC (±10%) Isolated @ 0.1A max.; requires RLE power supply WA-DAC-24-ST (not included)

Solid State Output: 12-36VAC @ 0.01A min., 0.1A max.; 18-36VDC @ 0.01A min., 0.1A max.

Leader Cable (Non-sensing)

Length: 14 feet (4.27m)

Connector: N/A

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 1.55″W x 2.0″H x 1.0″D (39.4mmW x 50.8mmH x 25.4mmD)

Weight: 4 oz. (105g)

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant.

Key Features

No exposed metal sensing posts – nothing to rust or corrode

Potted electronics

Functions when submerged in water

Adjustable probes are easily adjusted to desired height

Can be screwed or ram set to floor or baseboard

Small footprint/enclosure

Simple installation

Ideal for tight areas

Power: N/A (powered by panel)

Leader Cable (Non-sensing)

Length: 14 feet (4.27m)

Connector: N/A

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 1.55″W x 2.0″H x 1.0″D (39.4mmW x 50.8mmH x 25.4mmD)

Weight: 5 oz. (136g)

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant

Key Features

Plug-and-Play configuration enables quick and effective monitoring of any local or remote facility

Web-accessible with a clean, easy to use, mobile-friendly web interface

Monitors eight dry contact inputs and four temperature or temperature/humidity sensors, plus one zone of leak detection

Single zone leak detection supports up to 200’ of leak detection sensing cable and/or spot detectors

USB power – run the F200 from a wall outlet via included adapter or a USB port on a server or other computer

Real-time monitoring, advanced notifications, and customizable thresholds

Multiple alarm notification configurations including audible and visible indicators, integrated web interface, email messaging, and SNMP traps

Relay output allows for simple control of an external device upon alarm condition

Modbus output enables simple integration to a Building Management System (BMS)

Integrated logging and trending, including CSV downloadable trending data.

Included Equipment: F200 controller, network cable, USB cable – USB mini B to USB A, 5V USB wall wart with Type A, C, G, and I blades

Additional Requirements: Digital temperature sensors, digital temperature/humidity sensors, leak detection leader cable, leak detection sensing cable, end-of-line terminator, rack mount kit (as needed for application)

Power: (US) 5VDC @ 500mA max; 110/240VAC 50/60Hz; wall adapter (Type A blade) to USB connector, with Type C, G, and I blades for international use (included)

Wired Inputs

Temperature/Humidity: 4 digital temperature or digital temperature/humidity sensor inputs; RJ11 connectors; plug-and-play; configurable alarm points

Digital (Dry Contact): 8 digital alarm points; configurable

Sensing Cable: One zone leak detection, compatible with all SeaHawk sensing cables and SD-Z and SD-Z1 spot detectors

Cable Input: Requires 15ft (4.6m) leader cable and EOL terminator (not included), or wire one SD-Z1 directly to the F200

Maximum Sensing Cable Length: 200ft (61m) of conductive fluid sensing cable, or 140ft (43m) of chemical sensing cable

Relay Output: 1 Form C summary relay; 2A @ 30VDC, 0.5A @ 125VAC. Configurable as summary alarm or manual operation.

Alarm Notification

Panel: Audible alarm, visible LED

Integrated Web Interface: Dashboard overview with alarm indicators

Email: 8 email recipients; email sent on alarm to recipients, distribution list, or email-to-SMS

SNMP Traps: Multiple community strings

Relay: 1 Form C summary relay output

Web Interface Login Security: 8 passwords read only; 8 passwords read/write

Communication Port

Ethernet: 10/100 BaseT, RJ45 connector; 500 VAC RMS isolation; DHCP enabled; Static IP-addressable

Protocols

TCP/IP: ARP; DNS; UDP; DHCP; ICMP

HTML: Supports multiple simultaneous connections

SMTP (email): SMTP authentication; SMTP relay; supports SSL; up to 8 recipients

Modbus TCP/IP: Modbus slave; TCP/IP transmission protocol

SNMP: V1; V2C MIB-2 compliant; NMS Manageable with Get and Traps: V2C Get, V2C and V1 Traps

NTP: Custom server settings

Logging: Logs 50 most recent alarm and return to normal events with date/time stamp

Trending: Records up to 86,400 points of sensor data. Sample interval set from 1 second to 1 day. CSV downloadable.

Operating Environment

Temperature: -40° to 185°F (-40° to 85°C)

Humidity: 0% to 100% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -40° to 185°F (-40° to 85°C)

Dimensions: 5.63″W x 1.0″H x 2.63″D (143mmW x 25mmH x 67mmD)

Weight: 10.1 oz. (287g)

Mounting: Stand alone; keyholes included for wall mount; rack mount bracket available

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010-1; certified to CSA C22.2 NO. 61010-1; RoHS compliant

Designed to work with all of RLE’s leak detection controllers, the SD-Z spot detector can be connected to other SD-Z units or to sensing or non-sensing cable.

Key Features

No exposed metal sensing posts – nothing to rust or corrode

Potted electronics

Functions when submerged in water

Adjustable probes are easily adjusted to desired height

Can be screwed or ram set to floor or baseboard

Small footprint/enclosure

Simple installation

Ideal for tight areas

Power: N/A (powered by panel)

Leader Cable (Non-sensing)

Length: 10 inches (0.25m); male & female connector

Connector: 1 male, 1 female; 4 pin, 0.96in (24.4mm) diameter; connects to SeaHawk sensing cable (SC) cable or non-sensing cable (NSC)

Operating Environment

Temperature: 32° to 122°F (0° to 50°C)

Humidity: 5% to 95% RH, non-condensing

Altitude: 15,000ft (4,572m) max.

Storage Environment: -4° to 158°F (-20° to 70°C)

Dimensions: 1.55″W x 2.0″H x 1.0″D (39.4mmW x 50.8mmH x 25.4mmD)

Weight: 3 oz. (93g)

Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010, CSA C22.2 No. 61010-1, IEC 61326:1997; RoHS compliant